AC Generator 5 to 90kVA |
|
| Specifications |
| Features |
| • |
Compact and aesthetically built
|
| • |
Conforms to all leading industrial and marine standards
|
| • |
Simple design, fewer parts easy access to coupling bolts, output terminals, and rotating diodes.
|
| • |
Simple to install and maintain
|
| • |
Wound with 2/3 pitches in stator to eliminate harmonics
|
| • |
Sophisticated and reliable AVR, having good capability to handle non-linear loads
|
| • |
Self lubricating, sealed type for ball bearing
|
| • |
Paralleling operation facility is optional in frame 4AB200 & 4AB225
|
|
| |
|
|
|
| Particulars |
| Phase |
Three/single |
| Frequency, Hz |
50 |
| Voltage, V |
415/240 |
| Power factor, lag |
0.8 |
| Ambient |
40°C |
| Altitude |
1000 mtrs |
| Speed, rpm |
1500 |
| Mounting |
Horizontal foot mounted |
| Duty |
Continuous |
| Direction of rotation |
Clockwise from DE |
| Automatic voltage regulator |
M/c mounted |
| Voltage regulation |
+/-1% with 4% prime mover speed variation |
| Standards |
IS 4722 -1992, IEC 34 |
| Class of insulation |
H |
| Temperature rise |
H |
| Enclosure |
IP 20 |
| Cooling |
IC 01 |
| Wave form distortion (thd) |
Less than 3% |
| Overload capacity |
10% overload for 1 hour. once in 12 hours |
| Unbalance permitted |
25% with none of the phase currents exceeding the rated current. Temperature rise limits for corresponding class of insulation may exceed 10°C under such conditions. Voltage regulation under above condition will not apply. |
| No. of bearings |
Single/double |
| Lubrication type |
Grease lubricated |
Please refer to the marketing department for data on individual rating required. |
| |
| Download Brochure |
| |
|
|
|
